tempmate.®-S1 Single-Use Temperature Data Logger tempmateS1 TMS90CX000

Prin cumpararea acestui produs se acorda pana la 12 puncte de loialitate. Cosul tau va totaliza 12 puncte de loialitate care poate/pot fi schimbat(e) intr-un cupon de 2,40lei.

Credit module TBI Pay 3.2.3

40.43 Lei x 4 rate


Produs nou

tempmate.®-S1 Single-Use Temperature Data Logger

Mai multe detalii

121,38leiTVA inclus.

Produsul nu este in stoc . Termenul de livrare trebuie confirmat !

- +

Cantitatea minimă de comandă pentru produs este 20

Mai multe informatii

Monitoring your cold chain – It’s easy with tempmate.®-S1 V2 temperature data loggers.

tempmate.®-S1 V2 data loggers were especially developed for monitoring temperature-sensitive products throughout the entire cold chain. Thanks to customer-specific settings being made directly in our factory, the tempmate.®-S1 V2 data loggers are ready for immediate use recording the relevant refrigeration data.

Automatic PDF and CSV report

The automatically created PDF and CSV reports contain extensive information that you can use to assess the goods being monitored: data curve, statistical values such as MIN, MAX, AVG, MKT and every single measurement value shown in table form.

Your benefits from our temperature data loggers at a glance

  • 2-year service life
  • Automatic PDF and CSV report
  • Up to 180 days’ recording time
  • Reprogrammable
  • Up to 5 alarm thresholds
  • Backup log protection mechanism
  • Transparent recording of temperature fluctuations within a cold chain
  • Economical and reliable
  • Very small and light: can be inserted into virtually any packaging
  • Protective cover: waterproof and food-safe
  • No additional software required
  • Detailed analysis with chart and table
  • LED lights show current status

The innovative Single-Use data logger tempmate.®-S1 V2 with integrated USB port is the ultimate companion for your goods when it comes to economical temperature monitoring of your transported items.

The tempmate.®-S1 V2 logger is preprogrammed and supplied in a standard configuration. If required, the customer can reprogramme and re-lock the logger. The following settings can be made using the tempbase.®-D V2 software:

  • Running time of up to 180 days
  • Up to 5 alarm thresholds
  • Password protection
  • Time zone
  • Alarm time delay (standard setting: 30 min)
  • Start time delay (standard setting: 0 min)

The loggers are therefore ready for use, although they can be reprogrammed by the customer if required. 

For carrying out the analysis, the tempmate.®-S1 V2 is connected directly to the USB port. A PDF and CSV report is then automatically generated. These show the temperature profile as well as all individual values plus statistical information. No hardware (such as cables or interfaces) or software required.

Data logger typeSingle-Use data logger
Temperature range-30°C to +70°C (-22°F to 158°F)
Accuracy±0.5°C/0.9°F (-20°C/+40°C) otherwise ±1.0
Storage capacity16,000 measurements
Life/Battery2 years/CR2450 button cell battery
Measurement interval10 minutes (standard – other options on request)
Recording time110 days (standard – other options on request)
Startup methodManual start or via the tempbase.®-D V2 software.
Stop methodManual stop, tempbase.®-D V2 or automatically when full.
Alarm typeSingle or cumulative. Up to 5 points.
Protection classIPE67/NEMA 6
Dimensions88mm x 47mm x 7mm [L x W x H]
Weightapprox 14.6g
CertifiedEN12830, CE, RoHS
Validation certificatePrintout and stored on logger
SoftwarePDF or CSV reader / Optional tempbase.®-D V2
Automatic reportPDF and CSV
PC connectionUSB 2.0, Type A
Alarm configurationOptional up to 5 alarm thresholds
ProgrammableOptionally via tempbase.®-D V2
Delivery contentsDispatch documents, certificate, writeable label and sealeable pouch

11 alte produse în aceeași categorie:

Clienții care au cumpărat acest produs au mai cumpărat și:

QR code